 |
| MODEL |
IS-TPH3200 |
IS –TPH4000 |
| Lifting capacity (Ton) |
3.2
|
4
|
Lifting height (mm)
|
1950 |
1950 |
| Min. Height (mm) |
150 |
150 |
| Inside column (mm) |
2750 |
2790 |
| Lifting time (s) |
50 |
55 |
| Truck adapters |
Included |
Included |
| Asymmetric arm structure |
Yes |
Yes |
| Weight (kg) |
650 |
800 |
| Motor Power |
3.0 HP |
3.0 HP |
| Power Supply |
230V/440V,50Hz |
230V/440V, 50Hz |
|
Features :
- Floor plate design & Clear Floor design
- Powder coated finish
- Locking teeth in both columns
- Limit switch for stopping at max. height
- Pull two sides of safety release cable to lower the vehicle
- Dual hydraulic cylinders ensures steady
- lifting & lowering
- Rigid safety shut-off bar
- Safety locks in each column
 |
| MODEL |
IS –TPM3000 |
Lifting capacity (Ton)
|
3
|
| Lifting height (mm) |
1800
|
| Min. Height (mm) |
150 |
| Overall height (mm) |
2650 |
| Lifting time (s) |
50 |
| Motor Power |
3.0 HP |
|
Features :
Mechanical Lift for 4 Wheelers, raises vehicles to any comfortable working height up to 1800 mm, leaving head room for complete under-chassis access. Ideal for muffler repair, rust proofing operation, transmission repair and any other repair calling for a wheel-free condition.
 |
| MODEL |
IS –FPH4000 |
| Max. lifting height |
1800 mm |
| Min. lowering height |
170 mm |
| Lifting time |
50 sec. |
| Capacity |
4 tons |
| Motor power |
3HP |
|
Features :
This four-post lift is designed for service and wheel alignment work, providing ample space around the vehicle. Owing to the low pick-up height this lift is specially designed for vehicles with low ground clearance. The runways can be readjusted to each other in order to adjust the lift to the individual work place. The cylinder is provided under the runway to save additional space. The four columns feature level adjustment for most accurate positioning of the vehicle, which makes this lift ideally suited for wheel alignment.
 |
| MODEL |
IS –SCA4000 |
Lifting capacity
|
4000 kg |
| Max. Lifting height |
1800 mm |
| Max. Jacks height |
450 mm |
| Platform Length |
4800 mm |
| Lifting time |
50 S |
| Power supply |
380 V |
| Motor power |
3HP |
|
Features :
Ideal choice for wheel changing, chassis checking, vehicle maintenance and wheel alignment use. Hydraulic synchronization system with tandem cylinder prevents uneven lifting or lowering of the load. Platform level can be well adjusted to meet the need for wheel alignment. Adjustable turntable position, long rear sliding plate and in built pit jack for easy run out compensation.
 |
| MODEL |
IS –SCS3000 |
Capacity
|
3000 kgs |
| Minimum lifting height |
200 mm |
| Maximum lifting height |
1750 mm |
| Lifting time |
45 sec |
| Lowering time |
35sec |
| Type of operation |
Hydraulic |
| Safety mechanism |
Pneumatic lock |
| Motor |
2 HP |
| Oil tank capacity |
25 litres |
|
Specification :
- Effortless loading and unloading
- Rugged and durable
- Air/electrical safety lock
- Optional manual pump during
- power failure time
- Portable and easy to install
Application :
- Pre-delivery inspection
- Under chassis repair
 |
| MODEL |
IS –TWC200 |
Loading capacity
|
200 kg |
| Maximum height |
800 mm |
| Minimum closed height |
125 mm |
| Top platform size |
1950 x 575 mm |
| Valve operation |
hand operated |
| Power |
0.5 HP |
| Unit weight |
130 kg |
| Locking position |
3 |
|
Features :
MS / Stainless steel top, manually controlled, electrically controlled. These versatile lifts are simple to operate,
suitable for repair and maintenance under normal conditions, it renders excellent trouble - free service. Moreover,
these lifts require lesser space, so you are maximizing on your floor area as well.
Features :
A large variety of parking systems suitable for installation indoors, in basements, open floors or open spaces outside commercial buildings, residential buildings, shopping malls, and other public places can be supplied.
This system offers vertical movement of pallets to accommodate maximum cars within the available area. This system is self-supporting steel structures and operated through Programmable Logic Controls (PLC). Parking is possible from 2 to 6 levels above the ground, or a combination of both above ground and underground. The pallet at the pit level & the top level moves vertically.
Advantages :
- Independent parking & Indoor and outdoor installation
- Effective use of space.
- Easy and low cost of installation.
- Minimum operational cost.
- Easy to drive-in and drive-out.
- Multiple entry/exit & parking/retrieving a car takes less
- Safe operation, PLC controlled & low noise level.
- Lifting & Lowering by Hydraulic Cylinder (in case of hydraulic by Electric Motor Chain Drives
(in case of motorized operation).
- All steel structure with corrosion resistant paint
 |
| Capacity |
Upto 1 Ton |
| Lifting Height |
Upto 1m |
| Platform size |
1000x750 mm |
|
 |
| Capacity |
Upto 6 Ton |
| Lifting Height |
Upto 24 Ft |
| Minimum closing |
380 mm |
| Floor Mounted |
|
|
|
